General

What is D·ENERGY and how does it work?
D·ENERGY is our "sensor" to read the energy consumption of your home. It is able to read the instantaneous consumption of the electrical syste...
Fri, 30 Oct, 2020 at 11:14 AM
Which electricity meters can D·ENERGY be installed on?
D·ENERGY is compatible with all energy meters equipped with a metrological LED, where the optical fiber of D·ENERGY can be placed, with a contractual power ...
Thu, 13 Aug, 2020 at 10:19 AM
How to install D·ENERGY
D·ENERGY is the device that reads the impulses generated by the electricity meter,  transmitting them via radio frequency to the associated DiCE SMART devic...
Fri, 30 Oct, 2020 at 11:23 AM
What distance can D·ENERGY cover?
D·ENERGY uses a low frequency “long range” transmission protocol, which means that it is able to cover great distances and overcome architectural barriers s...
Fri, 30 Oct, 2020 at 11:29 AM
How do I know if DiCE SMART and D·ENERGY are not communicating?
Once the device has been paired using the smartphone guided procedure, DiCE SMART will turn yellow (with steady light). If the signal does not arrive from D...
Mon, 10 Aug, 2020 at 2:22 PM
What is the metrological LED?
The electricity meters are always equipped with two red LEDs that flash with a certain frequency. Here is an extract from the manual of the new "open m...
Fri, 30 Oct, 2020 at 11:34 AM
What autonomy does D · ENERGY have?
The estimated battery life is up to one year. This estimate was based on 16 transmissions per hour to DiCE SMART, which equals to the transmissions that wou...
Fri, 30 Oct, 2020 at 11:38 AM
Change contractual power and meter sensitivity
 needs to have some essential information about the meter it will be installed on, in order to provide an accurate consumption reading. During the insta...
Fri, 30 Oct, 2020 at 11:41 AM
Field test D·ENERGY, in-depth analysis
While realizing D·ENERGY, numerous tests were carried out to verify the actual signal strength. Here are some of them. 1. Historic building, each floor wa...
Mon, 10 Aug, 2020 at 2:29 PM